Full Fenders with Light Kits

Colors

Mounting Brackets

Pricing

Low Light & High Light Fenders These two styles of fenders have the same unique features as our full fenders but with light boxes molded directly into the fender. The High Light Fenders have enough room for 3 round or rectangle lights. The Low Light Fenders have room for 3 round, rectangle, or oval lights set at an angle.

These lighted fenders have the light box enclosed in the rear so your tires are not throwing debris at your lights or wires. We offer a WTI wiring harness to fit these fenders. It comes in three sections, 2 fender harnesses and 1 "Y" truck harness. This will plug directly into your existing harness, then "Y" off to each fender and a center light panel if need be. Where each harness fonnects to the fender is a twist coupler, this lets you disconnect the wires to remove the fenders without cutting any wires. (Not available for Canadian axle spacing.) Lights are not included in the price, however, we have LED lights available upon request.

Gel Coat Colors

	Gray Primer
	Black
	White

Painting

The black and white gloss gel coat can be waxed and installed without painting.   If your fenders need to be painted to match the color scheme of your truck we recommend painting the sandable, gray primer gel coat fenders.  Your fenders cannot be painted before shipping, however, if you would like W.T.I. Custom Shop to install the fenders, we can have them painted at a professional body shop.  You will need to supply us with your color name, paint code and a deposit. The cost for painting sometimes varies with the color chosen.  The W.T.I. fenders will be painted and ready to install when you come in for your installation appointment.  Installation time is between 4 and 6 hours. 

Mounting Brackets

	Tubular steel with 1/4" wall
	Flat plates 3/8" thick
	Gusseted corners
	Mitered cuts
	Capped ends
	Grade 8 & stainless bolts included
	Built Tuff - Built to Last
	Available with Standard (52") axle spacing.
	Weight: 275 pounds per set (including brackets) (Approximate)

Complete step by step instructions (with pictures) are included with each kit.  Please note that due to the variations in each truck, final installation requires drilling into the frame and welding.

No mud flaps are not required on W.T.I. Fenders, however if you would prefer to have mud flaps we have a mud flap bracket available.  They are welded on to the bottom of the rear fender bracket.

We offer technical support by phone at 219-474-6393 during regular business hours.  Complete fender installation services are also available at our facility in Kentland, IN.  Appointment required.

Prices

Please note...... the wiring harness and lights are NOT included in the price of the light panel fenders.

Prices are subject to change.
US Dollars

Recommended 5th Wheel Height for all W.T.I. Fenders
(measure from ground to top of fifth wheel)

If you have:
22.5 low pro tires	48"
22.5 standard tires	49"
24.5 low pro tires	49"
24.5 tall rubber	51"

This is the minimum height we recommend. This does not guarantee you will not hit the fenders with the trailer, but in our experience it has been sufficient. The higher the 5th wheel the better!