Soilmaker
Product #HLPF

The High Light Fenders have enough room for 3 round or rectangle lights.

These lighted fenders have the light box enclosed in the rear so your tires are not throwing debris on your lights or wires. We offer a WTI wiring harness to fit these fenders. It comes in three sections, 2 fender harnesses and 1 "Y" truck harness. This will plug directly into your existing harness, then "Y" off to each fender and a center light panel if need be. Where each harness connects to the fender is a twist coupler, this lets you disconnect the wires to remove the fenders without cutting any wires. (Not available for Canadian axle space.)

Lights are not included in the price, however, we have LED lights available upon request.

Complete step by step instructions (with pictures) are included with each kit. Please note that due to the variations in each truck, final installation requires drilling into the frame and welding.

Mud flaps are not required on W.T.I. Fenders, however if you would prefer to have mud flaps we have a mud flap bracket available. They are welded on to the bottom of the rear fender bracket.

We offer technical support by phone at 219-474-6393 during regular business hours. Complete fender installation services are also available at our facility in Kentland, IN. Appointment required.

  • Gel Coat Colors - Gray Primer, Black, White
  • The black and white gloss gel coat can be waxed and installed without painting. If your fenders need to be painted to match the color scheme of your truck we recommend painting the sandable, gray primer gel coat fenders. Your fenders cannot be painted before shipping, however, if you would like W.T.I. Custom Shop to install the fenders, we can have them painted at a professional body shop. You will need to supply us with your color name, paint code and a deposit. The cost for painting sometimes varies with the color chosen. The W.T.I. fenders will be painted and ready to install when you come in for your installation appointment. Installation time is between 4 and 6 hours.

[ top]

  • Tubular steel with 1/4" wall
  • Flat plates 3/8" thick
  • Gusseted corners
  • Mitered cuts
  • Capped ends
  • Grade 8 & stainless bolts included
  • Built Tuff - Built to Last
  • Available with Standard (52") axle spacing.
  • Weight: 275 pounds per set (including brackets) (Approximate)

Complete step by step instructions (with pictures) are included with each kit. Please note that due to the variations in each truck, final installation requires drilling into the frame and welding.

No mud flaps are required on W.T.I. Fenders, however, mud flap brackets are included with all bracket kits. The mud flap brackets are welded onto the bottom of the rear fender bracket.

We offer technical support by phone at 219-474-6393 during regular business hours. Complete fender installation services are also available at our facility in Kentland, IN. Appointment required.

[ top]

 

The wiring harness and lights are NOT included in the price of the light panel fenders.

Call for pricing & prices are subject to change - US Dollars

High Light Panel Fenders w/brackets
Wiring Harness
Peterson LED's
Peterson sealed beam lights
Mud Flap Brackets
Paint Brackets Only (Black)
Paint - varies by color
Installation Call for Pricing

 

Recommended 5th Wheel Height for all W.T.I. Fenders
(measure from ground to top of fifth wheel)

This is the minimum height we recommend. This does not guarantee you will not hit the fenders with the trailer, but in our experience it has been sufficient. The higher the 5th wheel the better!

22.5 low pro tires 48"
22.5 standard tires 49"
24.5 low pro tires 49"
24.5 tall rubber 51"
Be sure to check out the Ordering Tips

[ top]

 

W.T.I. Truck Accessories
a division of: Watt Trucking, Inc.
P.O. Box 113
Kentland, IN 47951
Telephone
(800) 346-6743
Fax Line
(219) 474-5194
E-mail